SEAI-registered · Safe Electric installed

Choose the EV charger we install in your home

Every Volt Éire installation includes an SEAI-registered smart charger, dynamic load balancing, and the certification and grant paperwork. Pick a unit below — each one carries its own fixed all-in price, and the flat €300 SEAI grant applies whichever you choose.

Choose your charger

BENY 7.4 kW Smart Charger

The value pick — everything most homes need

Upfront
€1,599
SEAI grant
-€300
Net after grant
€1,299

All displayed prices include the charger, standard Safe Electric installation, commissioning, certification support and SEAI paperwork.

  • 7.4 kW Type 2 tethered charger with 5 m cable
  • Z-BOX app scheduling plus RFID access cards
  • SEAI-registered and included in the base installation price
  • Dynamic load balancing included, so a busy house never trips the fuse

DLB included

Dynamic load balancing is fitted as standard, using current sensors on your incoming supply so the charger eases off when the house is drawing heavily.

BENY 7.4 kW smart EV charger with tethered Type 2 cable.
Ohme Home Pro tethered 7.4 kW EV charger, black, with its screen showing a delayed charging schedule.
Ohme ePod socketed 7.4 kW EV charger, black, showing the Type 2 socket cover and status bar.
myenergi Zappi GLO 7 kW tethered EV charger, black, with its Type 2 cable coiled below the unit.
Wallbox Pulsar Max smart EV charger, black, shown head-on with its illuminated status ring and the MAX badge.
Standard package

Showing BENY 7.4 kW Smart Charger, €1,599 upfront and €1,299 after grant.

Why the BENY 7.4 kW Smart Charger

Our standard unit, and the one most homes end up with. A 7.4 kW tethered Type 2 charger that fully replenishes a typical EV overnight on a night-rate tariff, supplied and installed at our fixed price with the SEAI paperwork handled.

Tethered 5 m cable — nothing to fetch from the boot

Schedule charging to night-rate hours in the Z-BOX app

RFID cards for households that want to control who charges

OZEV-approved and on the SEAI register

Worth knowing

  • The cable is fixed, so it cannot be swapped for a longer one later
  • This unit does not document open-PEN protection. Your installer checks existing earthing and bonding and specifies any necessary work under Irish rules
Companion app

Take control with the Z-BOX app

Scheduling, charge history and access cards. Set it once to charge on your night rate and it repeats nightly.

Published by Zhejiang Benyi New Energy Technology Co., Ltd..

Full specifications

Below is what you get with a Volt Éire BENY 7.4 kW Smart Charger installation.

Model
BENY BCP-A2N-P
Power output
7.4 kW
Supply
Single phase, 32 A
Connector
Tethered Type 2, 5 m cable
Access control
App and RFID card
Manufacturer warranty
3 years
SEAI grant
Eligible — registered smart charger

Source: BENY BCP-P series datasheet and OZEV chargepoint approval.

Certified, tested, and grant-eligible

Every model we install is on the SEAI Smart Charger register, so your €300 grant goes through without friction.

SEAI Smart Charger register

Approved for the flat €300 SEAI home charger grant.

Your installation is covered by a 2-year Volt Éire workmanship warranty, and the charger unit carries a separate 3-year manufacturer warranty from BENY. We handle manufacturer claims for you — one email to ev@volteire.ie covers both.

Documentation

Want to read the manual before you commit? Here's the official documentation from the manufacturer.

Home EV charger installed on an exterior brick wall with isolator switch.

Installed, not just boxed

A compact wall-mounted charger for Irish homes

Your installer confirms the cable route, mounts the unit, wires it into your fuseboard with the correct isolator and protection, commissions the charger, and walks you through first use before leaving.

  • Suitable for indoor or outdoor wall mounting.
  • Full test charge before your installer leaves.

What's in the box

We bring everything needed for a complete installation — the charger unit, mounting hardware and cabling. You don't need to buy anything extra, including the Type 2 charging cable on a socketed unit. Your installer fits the unit to your wall, wires it into your fuseboard, and commissions it before they leave.

Built-in protections

Every unit we fit includes automatic electronic protections — leakage detection, over-current and over-temperature cutoffs, and earth-fault detection among them — on top of the dedicated RCD and breaker we install at your fuseboard. The charger watches itself and stops the moment something looks wrong.

Need a commercial unit?

The page above covers our home installation range. For workplace, fleet, or multi-bay commercial installations, our suppliers also make higher-power dual-cable units on the SEAI commercial grant — get in touch and we'll quote separately.

Talk to us about commercial
Humm

Prefer to pay monthly?

Spread the cost of your installation with Humm finance, subject to approval.

See finance options

Finance is provided by Humm and is subject to approval. Terms, fees and credit checks apply.

Ready to get yours installed?

Upload six quick photos of your home and we'll confirm Standard pricing within 24 hours. Most Irish homes qualify.

What's Included in an EV Charger Installation | Volt Éire | Volt Éire